Advancing UK Aerospace, Defence, Security & Space Solutions Worldwide
  • Home
  • /
  • Defence
  • /
  • Marshall first authorised C-130 centre wing box replacements Centre of Excellence

Defence

Marshall first authorised C-130 centre wing box replacements Centre of Excellence

Marshall has been recognised by Lockheed Martin as the world’s first authorised Centre of Excellence for centre wing box replacements on the C-130 Hercules tactical airlifter.

Image courtesy Marshall

Leaders from Marshall and Lockheed Martin gathered to mark the achievement during the annual Hercules Orion Conference in Atlanta, located near the C-130 production line in Marietta, Georgia.

Marshall has completed nearly 80 centre wing box replacements since 2004 and remains the only organisation to have performed these highly complex procedures on both legacy C-130 platforms and the current production model C-130J Super Hercules. Furthermore, no other organisations have successfully completed a C-130J centre wing box replacement outside the United States.

Advertisement
ADS S &P RT

Bob Baxter, Chief Growth Officer, Marshall, said: “We are incredibly proud to have added yet another world-first to our C-130 engineering credentials.

“This recognition from Lockheed Martin reinforces our position as an industry leader in non-standard repair and replacement, and demonstrates the strength of our capability enhancement offering.”

Above: Bob Baxter, Chief Growth Officer at Marshall and Mark Jarvis, Director of International Programs (Europe, Americas, Pacific Rim), Lockheed Martin Air Mobility & Maritime Missions, at the 2024 Hercules Orion Conference.
Courtesy Marshall

The purpose of a centre wing box replacement is to extend the operational life of an aircraft. The centre wing is a major primary structure of an aircraft, referred to as a 'lifed article'.

The original centre wings fitted during aircraft manufacture have a lifespan of approximately 19,000 hours. Installing a new enhanced service life centre wing effectively re-lifes the aircraft, maintaining airworthiness and potentially extending its lifespan by decades.

Lockheed Martin supplies Marshall with service bulletins, bespoke tooling and kits with all of the parts and components required to perform the replacement on the aircraft. While the original centre wing is removed, interfacing structures and main frames are thoroughly inspected and serviced before the enhanced service life centre wing is installed and the internal wiring and plumbing is replaced.

Advertisement
ODU RT 2

Rod McLean, vice president and general manager of the Air Mobility & Maritime Missions Line of Business at Lockheed Martin Aeronautics, said: “Recognising Marshall as the first Lockheed Martin-approved Centre of Excellence for its work leading the C-130 centre wing box replacement program is a natural choice.”

“Marshall is a vital part of the C-130 Hercules community because it embodies a commitment to excellence in C-130 maintenance and support, ensuring these versatile aircraft continue to serve operators reliably and efficiently in meeting global mission demands.”

Marshall is currently conducting centre wing replacements on 12 C-130J aircraft – eight of which have been completed, with a further four to go. Due to the various modifications that the aircraft have undergone, specialist adaptations to the process have been required for this fleet to ensure a seamless integration.

Other Marshall C-130 world-firsts:

  • First authorised Lockheed Martin Hercules Service Centre for legacy C-130 B-H
  • First authorised Lockheed Martin Heavy Maintenance Centre for C-130J Super Hercules
  • First OEM approval from Lockheed Martin for in-house manufacture of C-130J parts

Based in Cambridge, UK, Marshall Aerospace and Defence Group has supported the global C-130 fleet since 1966. The company was the first authorised C-130 service centre in the world and also has the distinction of being the first C-130J Super Hercules service centre as well.

Advertisement
General Atomics LB General Atomics LB
Cohort acquires EM Solutions

Defence Space

Cohort acquires EM Solutions

22 November 2024

Independent technology group, Cohort plc, has strengthened its naval defence sector offer with the acquisition of EM Solutions, an Australian developer and producer of high-end satellite communication terminals for global navy and defence customers.

DE&S wins coveted Public Sector Organisation of the Year Award

Defence Events

DE&S wins coveted Public Sector Organisation of the Year Award

21 November 2024

Defence Equipment & Support (DE&S) fought off strong competition to be named as the winner of the coveted Public Sector Organisation of the Year category at the annual Association for Project Management (APM) Awards 2024.

Recruitment bias preventing STEM professionals returning to work

Aerospace Defence Security Space

Recruitment bias preventing STEM professionals returning to work

21 November 2024

Bias in the recruitment system is still preventing talented STEM professionals on a career break from returning to employment, according to a new survey by STEM Returners.

DE&S’ LCST Team colleagues receive King’s Coronation Medals

Defence Events

DE&S’ LCST Team colleagues receive King’s Coronation Medals

20 November 2024

Four colleagues of DE&S’ Logistics, Commodities and Services Transformation (LCST) Team have received King’s Coronation Medals in recognition of their work on the Coronation of King Charles III and Queen Camilla.

Advertisement
ODU RT
BAE Systems to provide active control sidesticks for JetZero

Aerospace Defence

BAE Systems to provide active control sidesticks for JetZero

20 November 2024

BAE Systems will deliver and integrate next-generation active control sidesticks on JetZero’s new blended-wing body aircraft, which is set to accelerate the path to a sustainable future in aviation.

Base Materials

Defence Security

Base Materials' Subtec 11500 first with DNV TAC

20 November 2024

Leicester based Base Materials has become the first syntactic foam subsea buoyancy manufacturer to receive DNV type approval (TAC) on its Subtec 11500 material and Approval of Manufacture (AoM) for the complete range of Subtec materials.

Advertisement
ADS S &P RT