in Aerospace / Defence / Space

Chances of hypersonic travel heat up with new materials discovery

Posted 6 July 2017 · Add Comment

Researchers at The University of Manchester in collaboration with Central South University (CSU), China, have created a new kind of ceramic coating that could revolutionise hypersonic travel for air, space and defence purposes.

Hypersonic travel means moving at Mach five or above, which is at least five times faster than the speed of sound. When moving at such velocity the heat generated by air and gas in the atmosphere is extremely hot and can have a serious impact on an aircraft or projectile’s structural integrity. That's because the temperatures hitting the aircraft can reach anywhere from 2,000 to 3,000 °C.

The structural problems are primarily caused by two processes called oxidation and ablation. This is the when extremely hot air and gas remove surface layers from the metallic materials of the aircraft or object travelling at such high speeds. To combat the issue materials called ultra-high temperature ceramics (UHTCs) are needed in aero-engines and hypersonic vehicles such as rockets, re-entry spacecraft and defence projectiles.

However, at present, even conventional UHTCs can’t currently satisfy the associated ablation requirements of travelling at such extreme speeds and temperatures. However, the researchers at The University of Manchester’s and the Royce Institute, in collaboration with the Central South University of China, have designed and fabricated a new carbide coating that is vastly superior in resisting temperatures up to 3,000 °C, when compared to existing UHTCs.

Chances of hypersonic travel heat up with new materials discovery Professor Philip Withers www.adsadvance.co.uk

Professor Philip Withers (above), Regius Professor from The University of Manchester, said: “Future hypersonic aerospace vehicles offer the potential of a step jump in transit speeds. A hypersonic plane could fly from London to New York in just two hours and would revolutionise both commercial and commuter travel.

“But at present one of the biggest challenges is how to protect critical components such as leading edges, combustors and nose tips so that they survive the severe oxidation and extreme scouring of heat fluxes at such temperatures cause to excess during flight.”

So far, the carbide coating developed by teams in both University of Manchester and Central South University is proving to be 12 times better than the conventional UHTC, Zirconium carbide (ZrC). ZrC is an extremely hard refractory ceramic material commercially used in tool bits for cutting tools.

The much improved performance of the coating is due to its unique structural make-up and features manufactured at the Powder Metallurgy Institute, Central South University and studied in University of Manchester, School of Materials. This includes extremely good heat resistance and massively improved oxidation resistance.

What makes this coating unique is it has been made using a process called reactive melt infiltration (RMI), which dramatically reduces the time needed to make such materials, and has been in reinforced with carbon–carbon composite (C/C composite). This makes it not only strong but extremely resistant to the usual surface degradation. 

Professor Ping Xiao, Professor of Materials Science, who led the study at The University of Manchester explains: “Current UHTCs used in extreme environments are limited and it is worthwhile exploring the potential of new single-phase ceramics in terms of reduced evaporation and better oxidation resistance. In addition, it has been shown that introducing such ceramics into carbon fibre- reinforced carbon matrix composites may be an effective way of improving thermal-shock resistance.”
 
A paper - Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3000°C - has been published in Nature Communications. It is a collaborative research between Profs Ping Xiao and Philip Withers (Royce Institute) in School of Materials, University of Manchester and Dr. Yi Zeng and Prof. Xiang Xiong in Powder Metallurgy Research Institute, Central South University of China.

 

* required field

Post a comment

Other Stories
Advertisement
Latest News

ADS encourages partnership with industry to enhance national security

ADS, the UK trade organisation representing the aerospace, defence, security and space sectors - with over 1,000 member businesses - said today that the Government should work more collaboratively with industry to deliver

Airbus encourages NI SMEs to look to Space

Airbus Defence and Space in partnership with Digital Catapult NI, Invest Northern Ireland and the Northern Ireland Space Office launches a new space challenge to encourage Northern Ireland small and medium-sized enterprises and

Kelvin Hughes to supply INBS to RNZN

Kelvin Hughes has been awarded a contract by Hyundai Heavy Industries to supply the Integrated Navigation Bridge System (INBS) for The Royal New Zealand Navy (RNZN) Maritime Sustainment Capability (MSC) Vessel.

Aerothermal delivers first of its kind oven to aerospace supplier

Aerothermal has designed, manufactured, delivered and installed a new, state-of-the-art eight metre oven to a global aerospace supplier, the first of its type in the world.

Appsecco enters training partnership with DevSecCon

Specialist application security company Appsecco, has announced that it is launching a training partnership with DevSecCon, a global platform for security experts, software developers and DevOps practitioners, to showcase their

Luton Airport has its busiest ever summer

A total of 1.6 million passengers flew through London Luton Airport (LLA) in August, a 6.8% rise compared with August 2016 and the 41st consecutive month of growth for LLA.

SMI MilSat SK0409021017
See us at
SMI MilSat BT2907101117SMI12DE BT203280917SMIUAV BT1005280917Aviation Africa BT18418SMI FAV BT1007161117SMI AirMissBT0305251017Advanced Engineering BT1007021117